DEXAPLAN BA 611 - 08-2007 Technical Information download pdf (Page 14)

12 GB/IE/CY

Rectifying faults

Fault Cause Remedy

Motion detector

detects motion

without apparent

reason.

Pets, air move-

ments, direct

light, etc.

Change the

position of the

motion detector.

Use a masking

sticker to

restrict a par-

ticular part of

the detection

angle / range.

The range of the

motion detector

is not adequate.

Ambient temper-

ature is too high

(20°C is optimal).

Change the

position of the

motion detector.

Device is mounted

too low or too

high.

Change the

mounting

height or the

inclination of

the motion

detector.

The

LED

ﬂashes regularly.

There is no

backup battery

connected or the

connected back-

up battery is too

weak.

Connect a new

backup battery.

The called

number does

not receive a

call on alarm.

The telephone

number was in-

correctly or not

entered.

Enter the tele-

phone number

again.

Fault Cause Remedy

Dialling function

is switched off

(

appears on

the LC display.

Set the dialling

function on.

(

does not

appear on the

LC display.

The telephone

line is faulty.

Check the

telephone line

with an

analogue tele-

phone.

The device

does not react

to the pass-

word.

You have not

yet given a

command after

password entry.

Press the OK

key

to arm/

disarm the

device.

Press the PROG

key

to enter

settings mode.

The password

entered is

wrong.

Enter the cor-

rect password.

If you have

forgotten the

password, set

the device back

to the factory

settings as de-

scribed in the

section “Chang-

ing the pass-

word”.

Fault Cause Remedy

Your settings

were not

stored.

The settings

were not con-



Press the OK

key

฀฀

settings.

There are other

faults

Carry out a re-

set (see section

“Making the

settings” item

“Reset”).

Should you have further questions or problems please

฀฀฀฀฀฀-

tion on problem handling.

Maintenance and cleaning

Maintenance of the alarm system

You should regularly check the device to see that it is

safe and working properly.

Cleaning

Before you clean the device, pull the mains adapter out

of the mains socket. Use a dry or slightly moist cloth for

cleaning the device. Never immerse the device in water.

Do not use solvents to clean the device.

Rectifying faults / Maintenance and cleaning

1 2 ... 9 10 11 12 13 14

Comments to this Manuals

No comments

DEXAPLAN BA 611 - 08-2007 Technical Information Page 14

Comments to this Manuals

Related products and manuals for Motion detectors DEXAPLAN BA 611 - 08-2007