DEXAPLAN BA 611 - 08-2007 Technical Information Page 10
- Page / 38
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
8 GB
Press the OK key
y
Wait 10 seconds until the device automatically quits
the settings mode.
Switching automatic dialling on /off:
You can switch off the automatic dialling function.
The device calls all the stored telephone numbers if the
automatic dialling function is switched on when an
alarm is triggered.
The LC display shows
if the automatic dialling func-
tion is not switched on. Factory setting: “CALL ON” (dial-
ling function switched on)
Enter the current password.
Press the PROG key
r
until the
symbol flashes at the top of the LC dis-
play
w
.
Press the OK key
y
Use the key
o
and key
i
to select “CALL
ON” (dialling function switched on) or “CALL OFF”
(dialling function switched off).
Press the OK key
y
Wait 10 seconds until the device automatically quits
the settings mode.
Selecting the number of dialling processes:
You can select the number of times the automatic dial-
ling function dials the numbers as between once and 5
times. Every stored telephone number will be called this
number of times, whether or not the call is answered.
Factory setting: 3 times
Enter the current password.
Press the PROG key
r
until the word “CYCLE” flashes at the top of the LC
display
w
.
Press the OK key
y
Using the key
o
and the key
i
select the
number of automatic dialling processes (1/2/3/4/5).
Press the OK key
y
Wait 10 seconds until the device automatically quits
the settings mode.
Setting the entry delay:
Here you can set the time you have, from the time any
motion is detected by the device in the armed state, to
cancel the alarm before the siren starts or the telephone
numbers are automatically dialled.
Factory setting: 20 seconds.
Enter the current password.
Press the PROG key
r
until the word “ENTRY” flashes at the top of the LC
display
w
.
Press the OK key
y
Using the key
o
and the key
i
select the
length of the entry delay (0 / 5/ 10 / 15 /20 seconds).
Press the OK key
y
Wait 10 seconds until the device automatically quits
the settings mode.
Setting the date / time display:
1. Enter the current password.
2. Press the PROG key
r
until the word “TIME” flashes at the top of the LC
display
w
.
3. Press the OK key
y
4. The LCD display now shows:
05 – 01 – 01 12 - 00
= Year – Month – Day Hours - Minutes
y
the required number of times.
6. Using the
key
o
and the key
i
select the
desired setting.
7. Press the OK key
y
8. Repeat items 6 and 7 until all the values have been
entered.
9. Wait 10 seconds until the device automatically the
settings mode.
Reset:
If you wish to delete all the settings or you have forgotten
your password, you can initiate a reset as follows:
Keep the PROG key
r
pressed until you hear a pip
sound.
Now immediately press the Pause key
t
until you
hear a pip sound.
Now remove the battery and disconnect the mains
adapter. After 2 minutes insert the battery again
and/or reconnect the mains adapter.
Now all the factory settings and the factory-installed
password (“000”) are restored.
Positioning the alarm unit
1. Limiting the detection range/angle:
In the as-supplied condition the motion detector has a
detection angle of approx. 100° and detection range of
approx. 6m (at a mounting height of 0.5 - 2m) (see Fig. G).
the motion detector.
To limit the detection angle use one of the two supplied
masking stickers
W
(complete or cut to size).
See Fig. H
Limited horizontal detection angle (approx. 40 °) e.g.
as a crossing detector.
See Fig. I
You can disable the motion detector by applying the
whole masking sticker, e.g. if detection is to be per-
formed by an externally connected detector (see the
section on “Optional connections”).
- ALARM AND EMERGENCY 2
- TELEPHONE DIALLER 2
- Introduction 5
- $EXAPLANÓ'MB(Ó 6
- Preparing for first use 8
- Telephone connection 8
- Power supply 8
- 10
- Rectifying faults 14
- Maintenance and cleaning 14
- Cleaning 14
- Disposal / Information 15
- :AWARTO»lÓ 17
- $ANEÓTECHNICZNE 18
- :ASTOSOWANIEÓ 18
- :AKRESÓDOSTAWYÓ 18
- 7YPOSAÑENIEÓÓ 18
- 7SKAZvWKIÓBEZPIECZESTWA 19
- 5RUCHOMIENIE 20
- :APLANOWANIEÓMIEJSCAÓMONTAÑU 20
- 0RZYgCZEÓTELEFONICZNE 20
- :ASILANIEÓ 20
- Ó5RUCHOMIENIE 21
- 5SUWANIEÓBDvW 26
- Sicherheit / Bedienung 27
- 4ARTALOM 29
- "EVEZETmS 30
- "IZTONSfGIÓUTALfSOK 31
- !ZÓELHELYEZmSÓKIVfLASZTfSA 32
- 4ELEFONCSATLAKOZfS 32
- ¼RAMELLfTfS 32
- ÓeZEMBEVmTEL 33
- (IBfKÓELHfRqTfSA 38
Related products and manuals for Motion detectors DEXAPLAN BA 611 - 08-2007
(14 pages)Philips SVGA/EVGA 15C04204 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Monitory Philips SVGA/EVGA 15C04204.
Dostarczamy 1 pdf podręczników Philips SVGA/EVGA 15C04204 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comments to this Manuals