DEXAPLAN BA 611 - 08-2007 Technical Information download pdf (Page 5)

4 GB

Introduction

Please read carefully and completely through these ope-

rating instructions and fold out page 3, the page with the

illustrations. These operating instructions form part of the

product and contain important information about bringing

the product into use and its handling. Always observe all

the safety advice. If you have any questions or are unsure

of how to handle the device please consult our Internet

page at www.dexaplan.com or contact our service centre

(see the section about “Service”). Keep these instructions

and if necessary pass them on to a third party.

Proper use

This alarm and emergency telephone dialler is intended

exclusively for use in internal rooms in private houses.

The power for the alarm unit is provided by the supplied

9V DC mains adapter connected to the 230V ~ AC, 50 Hz

mains supply. A 9 volt block backup battery (not included)

ensures the functions are retained if the mains supply is

interrupted. For the dialling function to work connection

to an analogue telephone line is required.

This alarm and emergency telephone dialler can be armed

and disarmed using the keypad or the remote control.

A programmable entry delay and an exit delay allow you

to arm or disarm the unit from within the monitored area.

The motion detector integrated into the alarm unit reacts

to the motion of people in the monitored area. On alarm

the alarm unit dials the telephone numbers you have

preprogrammed into it. In addition the siren integrated

into the alarm unit can give off an audible alarm sound.

The alarm can also be triggered immediately by a panic

button.

Alternatively the unit can be set to give a gong chime on

detection of motion.

The manufacturer shall not be liable for damage caused

by improper use or incorrect operation.

Included items

See Fig. A

1x Alarm unit BA 611

2x Masking stickers

2x Screws for alarm unit

2x Dowels for alarm unit

1x Remote control BA 611 R

a 1x Battery CN23 A, 12V alkaline

1x Telephone cable adapter (only included in

some countries)

1x Telephone connection cable (approx. 2m,

with RJ11 plug)

1x Mains adapter with approx. 1.8m cable

1x Operating instructions

Features and equipment

Alarm unit BA 611

See Fig. B

Telephone line connection “LINE”

Telephone connection “PHONE”

See Fig. C

{

Motion detector (PIR)

}

Power LED

LED for low battery /detection

LC display

Number keys 0 to 9

“PROG” key

“PAUSE” key

“OK” key

“PANIC” key

key

See Fig. D

Siren

[

Mains adapter connection socket (9V)

]

Gong On /Off switch

See Fig. E

Connection compartment cover

Screw for connection compartment cover

Screw holes for mounting

Connection terminals

Recess slot

Battery compartment

Screw for battery compartment cover

Battery compartment cover

Battery connector

Remote control BA 611 R

See Fig. F

“PANIC” key

Check LED

“ ” key for arming device

“ ” key for disarming device

See Fig. M

Battery compartment cover

Introduction

1 2 3 4 5 6 7 8 9 10 ... 37 38

Comments to this Manuals

No comments

DEXAPLAN BA 611 - 08-2007 Technical Information Page 5

Comments to this Manuals

Related products and manuals for Motion detectors DEXAPLAN BA 611 - 08-2007